Alesis Studio 24 8-channel Mixer - Used
Mill River Music brings you a used Alesis Studio 24 8-channel Mixer! This mixer is in great working condition, and functions as expected!
This Alesis Studio 24 8-Channel Mixer is a compact analog recording console released in the mid-1990s; with a 12-channel / 24-input total configuration featuring 8 mono mic/line channels (1–8) with phantom-powered preamps and 4 stereo input channels (9–16), this mixer has standard professional-level capabilities and is ready to power your next project!
Frequency Response: 20Hz - 50kHz ± 0.5dB
Equivalent Input Noise: -128.5dBu
THD+N: MIC/LINE to L/R Master Out <0.0025
Signal To Noise: 90dB
Dynamic Range: 108 dB
Front Panel Controls: Mic/Line Gain x 12, Hi EQ x 12, Mid EQ x 12, Mid EQ Sweep x 8, Low EQ x 12, Aux Send 3 x 12, Aux Send 4 x 12, Mon 1/2 x 12, Mon Pan x 12, Channel Pan/Bal x 12, Channel Faders x 12, Group Faders x 2, L/R Fader, Mon Return x 2, Aux Return x 2, Solo Master, CR level, Phone level
Front Panel Switches: Chan/Mon reverse x 8, Direct Out Source x 4,75kHz x 8, Mute x 12, Solo x 12, Group Assign x 12, L/R Assign x 12,Aux Return L/R Assign x 2, Aux Return Group Assign x 2, Aux Return SIP x 2, Monitor Link to L/R, Group Link to L/R, Group Mono, CR Source select x 4.
Rear/Top Panel Jacks: Mic In on XLR x 8, Line In on balanced 1/4" x 8, Channel Inserts on 1/4" x 8, Stereo Channel In on 1/4" x 8, Stereo Aux Returns on 1/4" x 4, Aux Sends on 1/4" x 2, Group Outputs on 1/4" x2, Group Inserts on 1/4" x 2, Main Outputs on 1/4" x 2, Main Inserts on 1/4" x 2, Tape Inputs/Direct Outputs on phono (RCA) x 16, Main Outputs on phono (RCA) x 2, 2-Track Tape Inputs on phono (RCA) x 2, Control Room outputs on 1/4" x 2, Monitor outputs on 1/4" x 2.
Front Panel Headphone: 1/4" TRS
----
Ships carefully packed and insured for full value. International buyers are welcome — please contact us for a shipping quote before purchasing.
About Mill River Music
Mill River Music is an independent, human-powered music shop located in downtown Northampton, MA, run by a team of players, enthusiasts, and certified repair technicians. Every piece of used gear we sell is personally inspected, tested, and set up before it ships — we don't list it until we'd be happy to play it ourselves.
As Martin and Taylor certified techs, we hold our guitar work to a high standard, and we're committed to full transparency about the condition of everything we sell. No surprises.
When you buy from Mill River, you're supporting an independent local business that genuinely cares — about gear, about players, and about doing things right. We're here every step of the way. Reach out anytime.
