A Power Distributor Like No Other
The Juice Bar is an innovative approach to how you power your rig. The Juice Bar is NOT a power supply but rather a power distributor that offers you multiple choices of how you would like to power you rig. You can use a battery bank like those used for cell phones or you can use a typical wall wart 9v switching power supply like our Juice or a 1Spot. You can also use a typical iPhone/iPad charger or anything of the like, it does not have to be an Apple product just any mobile device 5V charger.
Input Maximum Voltage – The Juice Bar provides flexibility on many levels which can also create a lot of possibilities of mismatch. We want you to be careful and mindful of voltage combinations that could possibly create harm to your pedals or the Juice Bar itself. The 9VDC input (2.1mm Barrel Jack) can handle many voltages. When using the 9V input (2.1mm barrel jack) the max input voltage is 24V. You can power the Juice Bar with anything from 9V to 24V as long as they are a maximum of 2 Amps (2,000 mA) and a negative tip polarity. The Juice Bar will down convert higher voltages internally to be appropriate which makes it very flexible powering scenario.
When using the USBc Input it is ONLY meant for a 5V charger that goes through internal conversion to 9V, 12V and 18V. DO NOT use anything other than a 5V USBc charger. (Typical mobile device charger).
Wattage – Has no bearing, any wattage will be fine
Amperage – the Juice Bar has a 2 Amp (2,000mA) max input tolerance on both inputs. DO NOT use anything above 2 Amps (2,000 mA) on either the USBc input or the 9V input.
