Gamechanger Audio PLASMA High Voltage Distortion Effects Pedal
Buy from our Reverb Shop
(While we are working on our eCommerce shop, you can buy this in our Reverb shop at the link above)
• High voltage distortion is a new and previously unexplored method of achieving signal clipping. You are playing a bolt of electricity, and the electrical discharges produced by the
PLASMA Tube are instantly converted back into audio signal.
• Unique frequency response with grainy and sizzling distortion textures. Sharp and massive pick attacks because of the naturally occurring noise gate.
• Wide scope if picking response. From sputtery broken sounds, to rhythmical staccato playing, all the way to rich and very long sustaining lead sounds.
• Harmonic transparency allows to play even the most complex chords. Suitable and designed to use with guitars, bass, synthesizers and drum machines.
Simplified Wet Signal Chain:
Input -> (EQ if on) -> Transformer to High Voltage -> Xenon Tube -> Antenna that picks up the electromagnetic vibrations surrounding the Tube -> (EQ if off) -> Blend with Clean -> Output
The expected life of the xenon tube is 10,000 to 70,000 hours of active playing. The xenon tube is replaceable.
The PLASMA Pedal is a revolutionary way of producing distortion by converting your instrument’s signal into a series of high-voltage plasma discharges in a sealed xenon filled tube.
The result is an incredibly sharp and sizzling overdrive that is extremely clear, responsive, and most importantly fun! This patent-pending technology of high-voltage electric discharge also acts as a natural noise-gating device that creates strong contrasts between staccato notes, as well as eliminating all unwanted noise and pick-up hum. The PLASMA Pedal’s electric discharge tube produces beautiful visible bolts of lightning that react to the input signal, thus creating a captivating experience for all players. In essence – you are playing a bolt of electricity.
Natural Noise Gate
As soon as you stop playing the electrical discharge within the gas-filled tube is interrupted, and the pedal will not produce any output signal at all. This feature allows you to achieve extreme contrasts between individual notes, by eliminating all of the in-between noises created by the instrument’s pick-ups or by humming strings.
Blend in your clean sound or your already overdriven sound to produce unique dirty sounds. Experiment with gated PLASMA sound and unaffected clean sound mixed together. Put it even in your amps FX loop and use the blend knob.
Extremely Wide EQ
The PLASMA pedal loses the original dry input signal and creates a new signal from fluctuations in the electromagnetic field surrounding the gas-discharge tube. This allows for a very wide range of frequencies. Boost and cut the lows and highs with the dedicated knobs. The EQ can be switched to affect only the wet sound or dry sound, which is especially suitable for bass.
Unique Harmonic Saturation
PLASMA pedal converts your instrument’s signal into a rapid series of electric discharges, which results in a large amount of non-linear harmonic saturation that causes extremely rich and responsive attacks, and brings out screeching sharp overtones and harmonics. These harmonic artifacts, produced as a by-product of the high voltage discharge are uncommon in traditional signal amplification, and therefore PLASMA Pedal’s distortion is unlike anything you have heard before.
30 Day Money Back Guarantee
The power supply is not included in the box. Plasma Pedal uses a standard 9V DC center-negative pedal power supply of at least 250 mA.
Input Type: 1/4” Unbalanced TS
Input Impedance: 1MΩ
Max Input Level: 7Vpp (+10dBu)
Output Type: 1/4” Unbalanced TS
Output Impedance: 100Ω
Max Output Level: 7Vpp (+10dBu)
Power connector: Center negative 2.1 x 5.5 mm barrel plug (the standard 9V)
Frequency Response: 20Hz to 22kHz
Controls: True bypass foot-switch button, Potentiometers: BLEND, VOLTAGE, VOLUME, LOW FREQ, HI FREQ, CLAEN EQ toggle switch
Indicator: Check indicator white LED
Connectors: IN, OUT, DC input
Power Requirements: 300mA, 9VDC
Peak Power Consumption: 2.7 W
Mean Power Consumption: 1 W
Power Consumption while silent: 0.025 W
Dimensions: LWH 148 x 96 x 70 mm / 5.1 x 3.8 x 2.8 in
Weight: 840 g / 1.8 lbs