CopperSound Pedals Telegraph V2 Auto-Stutter & Killswitch Pedal Gotham Grey

$249.00

Call us or Email Us to Order

or

Make way for the new Killswitch on the block! The successor to our popular Telegraph Stutter pedal, Telegraph V2 is our all new, redesigned killswitch and stutter system. Retaining aspects of the original design, Telegraph V2 features updated, proprietary all metal hardware. This sturdy (and stylish) upgrade now allows the player to control the effect with their feet, whilst retaining tactile efficiency for hand operation. On the inside, we’ve designed a brand new Active circuit from the ground up. Featuring new modes and parameters effectively impossible to attain on the original Stutter.

In addition to the classic Kill and Activate modes, we are excited to present:

Burst mode!
Burst mode is an automatic, tremolo-like stutter, adjustable from 110bpm to an astonishingly fast rate, set by the Burst Knob. In Burst mode, the effect can be latched (with a quick press of the key), or triggered momentarily (when the key is held). For the player that would prefer to only have momentary mode, we provide an internal dip switch to turn off the latching feature.

Additionally – emulating aspects of the original Kill and Activate modes – the “Polarity” toggle on the side of the enclosure further enhances the possibilities of Burst mode. When Polarity is set to “Kill”, your clean signal passes through until the key is pressed (engaging Burst). When set to “Activate”, no audio will be heard until the key is pressed, allowing for controlled bursts of sound! You can additionally control the rate of Burst mode externally by an expression pedal, or synced to a CV clock source to match the tempo. To cap it all off, Telegraph V2 features an integrated, power loss fail-safe, inso that if the pedal should lose power, it will automatically revert to a bypass state. This newly re-imagined telegraph pedal serves as a unique and creative tool for both live and studio use. Where rugged engineering meets on-the-fly inspiration!

The ultimate killswitch & stutter system:
• Three different modes – Kill, Activate, and Burst (automatic)
• Expression pedal (≤ 10K recommended) and CV speed control via CTRL jack
• Latching and momentary options
• Polarity switch to assign Burst mode operation
• Bi-color LED knob indicates speed and status
• Power-free, limited passive operation
• Fail-safe bypass if disconnected from power
• All-metal, proprietary hardware for rugged foot and hand operation
• Available in 6 finishes: Carolina Copper, Gotham Grey, Sierra Blue, Alpine White, Army Green, and Romeo Red
• Handmade in the U.S.A.

Specs:
9V – 2.1mm x 5.5mm Center Negative | 60mA consumption
In/Out: ¼” Instrument Cable
EXP: ¼” TRS Cable
CV: ¼” Instrument cable
4.9″ x 2.75″ x 2.98″ (including jacks and hardware)
Smart Bypass Equipped

Go back